Product Code: CC12/80

Quality without compromise
Aluminium epoxy powder coated cases with drip shield and stainless steel fixings withstand the rigors of an adverse environment: heat, humidity and salt air. Circuit boards are protected with an acrylic coating for maximum corrosion resistance. Temperature sensors ensure that power components will always operate within specified limits, if needed by automatic reduction of output current under extreme environmental conditions.

Universal 90 to 265 Volt input voltage range
All models will operate without any adjustment needed over a 90 to 265 Volt input voltage range, whether 50 Hz or 60 Hz.

Three outputs that each can supply the full output current
Three isolated outputs to simultaneously charge 3 battery banks. Each output is capable to supply the full rated current.

Three stage charging, with temperature compensation
The Centaur charges at bulk rate until the output has reduced to 70 % of the rated Amps, at which a 4 hour timer begins. After the timed period the charger switches to float rate. An internal temperature sensor is used to compensate the charge voltage with - 2 mV/_C (. 1 mV/_F) per cell. A dip switch is available to select the optimum charge/float voltages for Flooded Lead-acid, Gel or AGM batteries.

Intelligent, microprocessor controlled version
For the ultimate in battery charging we recommend our Microprocessor Controlled Phoenix range. Important features of the Phoenix Charger range are:

- adaptive 4-stage charging with variable absorption time, BatterySafe mode and Storage mode
- VENet: RS-485 interface for remote control, monitoring and computer assisted setting of all parameters
- battery temperature sensor
- battery voltage sensor


Download Fact Sheet
Download User Manual